Atex lighting for fluorescent lights

vitraIndustrial lighting must sometimes provide illumination in areas where usual lighting is inadequate due to the risk of accidental ignitions of flammable or explosive of materials. Airfal range of products include fluorescent light fixtures, that are suitable for Zone 1 and Zone 2 lighting installations with ATEX certification.

A high risk or hazardous area is where a mixture of air and potentially explosive substances such as gases, vapours, mists or dusts, could spread. Typical examples of hazardous environments are refineries, drilling platforms, chemical and power-generation facilities, mines… In these locations, it is required to ensure safety against occurrence of sparks and excessive temperature or arcs with adequate light fixtures. Currently, lighting for such areas requires complying with standards classified as Zone 1 and Zone 2.
Zone-1 contains a hazardous gas/air mixture under normal operating conditions. Zone-2 is hazardous only in abnormal operating conditions, and if so, it will only exist for a short time.

Our Explosion Protected Lighting For Hazardous Locations include fluorescent light fixtures that have been developed for use in hazardous areas and harsh environments and are certified. These fluorescent light fittings are manufactured with the highest quality materials and finishes.

Lighting for the industrial sector

Well balanced levels of illumination are essential in establishing safe and productive working conditions. Companies should take into account lighting in the industrial work place very seriously. Optimizing industrial lighting requires consideration of work tasks, environmental conditions and economic considerations. The benefits of adequate lighting include greater productivity and accuracy, improved safety and security, and improved moral for workers.

Several factors will have to be carefully analyzed such as the task, the working environment, the quantity and the quality of lighting. Well balanced illumination is essential for the establishment of a safe and productive work environment; optimizing illumination in the industrial workplace requires a number of considerations including level of lighting, type of equipment, environmental aspects, financial requirements, optic, lamp, temperature, goals, or type of work….

Lighting in the Industrial sector can be quite complexe. Due to a wide range of operations and tasks, many aspects have to take into consideration as they will impact the amount of light reaching a work surface as well as its quality.

 Required level of lighting in the industry

The required quantity of light (illuminance) depends mostly on the visible task the worker, or the type of the industrial task performed.

Here are some examples of industrial recommended lighting levels:

General Engineering Rough work

160 lux

General Engineering Medium work

400 lux

General Engineering Fine work

800 lux

General Engineering Very fine work

1600 lux

Outdoor Areas Mechanical loading

10 lux

Outdoor Areas Manual loading

50 lux

Warehousing Inactive storage

20 lux

Warehousing Loading bays

100 lux

Warehousing Small storage, packing

200 lux

Quality of lighting in the industrial sector

Factors influencing the quality of industrial lighting have a significant impact. These factors include flicker and glare, degree of contrast or shadows. There should be good contrast between objects of interest and background. Greater lighting in areas next to but outside the immediate work environment can make visibility difficult.

 Industrial lighting requirements

Industrial Lighting Standards address the importance of evaluation of energy consumption, and other key features aimed at improving overall performance in the workplace.