Luminaire designed for:
- mine lighting
- underground spaces susceptible to accumulation of Grisú gas.
- other indoor, outdoor or indoor industrial installations
Description of the luminaire:
Body made of cast iron with polyester powder coated yellow powder coating. Suspension flange in steel with 18mm hole. Junction box (“d” protection) with connection flanges and cable glands on one side of the luminaire body. The cable glands are made of cast iron and are designed for cables of Ø 10-16 mm and for cables of Ø 16-20 mm use the cable gland supplied as an accessory. The electrical components are mounted inside the body on a steel plate. A flange with a 10mm thick glass cover is connected to the body of the luminaire by means of a thread with locking screws and silicone gasket. The thread forms a fireproof barrier. The protective glass is tempered and resists minimum shocks of 7 J (overcomes the IK08). A steel hook secures the hoop-glass assembly during assembly operations. The steel parts are galvanized and chrome plated. The luminaire is equipped with a galvanized steel grille. The maximum cross-section of the supply conductors is 4mm2 . A three-pole connection block allows the exchange of two phases. The luminaire is equipped with 2 internal and 2 external earth connectors. The luminaire is designed as a piece to make continuous lines. If it is an end of line, the closing cap must be purchased separately.
|REF||SOURCE OF LIGHT||TEMPERATURE CLASS||WEIGHT|
|EX101||Incandescent 200W E27||T4||18|
|Incandescent 150W E27||T5|
|Incandescent 60-100W E27||T6|
|Compact 23W E27||T6|
|Incandescent 100W E27||T5|
|EX102||V. of Sodium 50W E27||T4||19|
|EX103||V. of Sodium 110W E27||T4||19|
|EX105||Compact TC-D (G24d-3)||T6||19.5|