Description

Applications

The Airfal VITRA luminaire has been developed from the Airfal PYROS luminaire, designed for operation in environments where an explosive atmosphere may form or be present in accordance with the ATEX 94/9/EC directive.
This luminaire is designed to have a high resistance to corrosion, chemical agents and temperature, achieved with the use of tempered borosilicate glass for the realization of the body of the luminaire.
The ITC-BT-29 of the BOE No. 224, based on the R.D. 400/1996, establishes the dangerous locations where products with ATEX certification must be installed:

• Places where flammable volatile liquids are transferred from one container to another.
• Garages and vehicle repair workshops. Private garages for parking of 5 vehicles or less are excluded.
• Interior of spray booths where spraying systems are used and their immediate surroundings when solvents are used.
• Dryers made of material with flammable solvents.
• Fats and oils extraction rooms using flammable solvents.
• Premises with flammable liquid deposits open or that can be opened.
• Laundry and dry-cleaning areas where flammable liquids are used.
• Gas generator rooms.
• Installations where flammable gases are produced, handled, stored or consumed.
• Pump and/or compressor rooms for flammable liquids and gases.
• Interiors of refrigerators and freezers in which flammable substances are stored in open, easily perforated or poorly sealed containers
• Any other site where there is a risk of explosion or fire due to the presence of flammable substances.

General characteristics
This luminaire complies with the NORMATIVE MARKING:
II 2GD Ex d IIC T6
II 2GD Ex tD A21 IP66 T85ºC

• Luminaire body: Toughened borosilicate glass tube 5 mm thick.
• Reflector: White painted steel plate.
• End caps: Aluminium 2030 (polyester paint RAL 7047).
• ATEX 94/9/EC marked: II 2GD Ex d IIC T6 Gb. Ex t IIIC T85º C Db.
• Equipment: Electronic or flow regulation.
• Working temperature: From -25° C to 55° C.
• Cable entry: M25 thread (2 inputs).
• Accessories: 2 zinc-plated steel clamps with rubber protection and 2 eyebolts.
• Glow wire test: 960 °C.