In some installations exposed to extreme temperatures, choosing an industrial luminaire involves more than simply checking its power rating, luminous flux or IP protection rating. It is essential to ensure that its components, materials and power supply systems can operate correctly under the installation’s thermal conditions.
Industrial furnaces, foundries, cold rooms and frozen storage facilities are examples of environments where temperatures can exceed the operating limits of conventional luminaires. In addition,temperature fluctuations, cold starts and proximity to heat sourcescan compromise equipment performance and service life.
How do extreme temperatures affect the performance of an industrial luminaire?
Both excessive heat and extreme cold can affect the operation of a luminaire’s components, accelerate the deterioration of its materials and cause premature failures.
Effects of High Temperatures on Luminaire Components
In high-temperature environments, one of the main challenges is the luminaire’s thermal management. When installed near furnaces or heat-generating machinery, the high ambient temperature makes heat dissipation more difficult and increases the temperature of its internal components.
This situation can lead to:
- Degradation of electronic components: drivers and power supply systems have a shorter service life and may fail if their maximum operating temperature is exceeded.
- Loss of light output: excessive temperatures accelerate the depreciation of luminous flux from LED modules, directly affecting their performance.
- Deterioration of materials and seals: prolonged exposure to heat alters the properties of plastics and sealing components.
- Increased maintenance requirements: premature ageing leads to frequent failures and replacements.
For this reason, it is essential to ensure that the luminaire as a whole is designed to withstand the expected ambient temperature.
Effects of low temperatures on materials and opperation
Low temperatures present specific challenges in cold rooms and deep-freezing facilities. Although LED technology can perform well in cold environments, not all components necessarily have the same operating temperature range.
The main aspects to consider include:
- Cold starts:electronic systems must operate correctly from the moment they are switched on. It is essential to ensure that components suitable for very low temperatures are used.
- Material behaviour: certain plastics and seals lose flexibility, compromising the luminaire’s sealing performance.
- Condensation and humidity: temperature changes encourage moisture accumulation through condensation.
- Thermal contraction: temperature variations affect joints and sealing systems.
What technical criteria should we check when choosing luminaires for extreme temperatures?
To ensure the right choice, four key aspects must be checked:
- Operating temperature range. Each luminaire has an operating temperature range specified by the manufacturer. It is important to distinguish between the overall temperature of the facility and the temperature at the mounting point, especially when nearby heat or cold sources are present.
- Materials and thermal resistance.The materials used partly determine the equipment’s ability to withstand extreme conditions. Borosilicate glass, for example, offers high thermal resistance and low thermal expansion. The properties of seals, covers, connections and wiring must also be checked.
- IP protection rating and IK impact resistance. The IP rating indicates the level of protection against the ingress of solids and water, while the IK rating indicates resistance to impacts. Both are relevant in industrial environments, but a high IP rating does not guarantee that a luminaire can withstand extreme temperatures.
- Maintenance and accessibility. In deep-freezing facilities, foundries or areas close to machinery, replacing a luminaire may require operations to be stopped. It is important to consider its durability, cleaning requirements and ease of maintenance.
Common mistakes when selecting lighting for extreme temperatures
When designing an industrial lighting installation, certain decisions can compromise equipment performance. Here are four common mistakes to avoid.
- Not checking the actual temperature at the installation pointUsing the overall temperature of the industrial building as a reference can lead to the selection of unsuitable equipment, especially near furnaces or heat-generating machinery.
How to avoid it:Check the expected minimum and maximum temperatures at the exact location where the luminaire will be installed.
- Considering only the IP protection rating
A luminaire that is resistant to dust and water is not necessarily designed to withstand extreme temperatures.How to avoid it: Also check the operating temperature range, materials and installation conditions specified by the manufacturer. - Overlooking temperature fluctuations and start-up conditions
Temperature changes during start-up, shutdown or cleaning cycles can affect electronic components and sealing systems.How to avoid it: Assess both continuous operating conditions and the effects of start-up and temperature fluctuations.
- Failing to consider maintenance requirements and environmental exposure
Humidity, chemicals, vibrations and high-pressure cleaning can accelerate equipment deterioration.How to avoid it: Assess the environmental conditions and maintenance requirements of the installation together.
What Lighting Solutions Are Available for Installations Exposed to Extreme Temperatures?
When operating temperatures exceed the limits of conventional luminaires, it is necessary to use solutions specifically designed for these environments.
High Technical Specification luminaires for demanding environments
At Airfal, we offer a range of High Technical Specification luminaires designed for installations where temperature and other environmental conditions require specialised performance.
For high-temperature applications, Oven is designed for furnaces, industrial extraction hoods and foundries, with versions capable of operating at temperatures of up to 200°C. Farm, meanwhile, is available in configurations suitable for temperatures of up to +80°C.
In extremely cold environments, Orion Low Temperatures is designed to operate at temperatures as low as -40°C, while Frozen can withstand temperatures down to -50°C, making it an option for deep-freezing facilities.
Each application requires a specific combination of materials, technology and technical specifications.
Discover these solutions in our range of High Technical Specification luminaires.
How to Choose the Right Luminaire for Your Industrial Facility
To select the right luminaire for extreme temperatures, it is advisable to provide the manufacturer with the following information:
- Expected minimum and maximum temperatures at the installation point.
- Type of industrial process and any potential sources of heat or cold.
- Additional environmental conditions: humidity, dust, chemicals or vibrations.
- Location and installation requirements: mounting height, accessibility and any required certifications.
- Lighting and maintenance requirements: illuminance levels, operating hours and maintenance frequency.This information makes it possible to identify the most suitable solution and avoid problems caused by incorrect luminaire selection.
Do you need lighting for an installation exposed to extreme temperatures?
At Airfal, we provide technical advice to assess the conditions of each project and select luminaires that meet its operational, safety and maintenance requirements.
Contact our technical team and discover our lighting solutions for demanding industrial environments.

CARLOS JIMÉNEZ – ATEX engineer

















